Senin, 16 Oktober 2017

FULL FIRMWARE SAMSUNG

SAMSUNG PDA,AP,CSC,Phone,CP,BL,Bootloader,Pit Files

download
Diposting oleh di Tidak ada komentar:

Senin, 11 September 2017

FRP j1 by kedaiponsel ceger


Diposting oleh di 1 komentar:

Jumat, 01 September 2017

XIOMI 5 miCloud done ....


Diposting oleh di 1 komentar:

Rabu, 30 Agustus 2017

ASUS zen 4 Unbrick

Fix Droidboot Zenfone 4 (Unbrick)

Cara mengatasi hh Asus zenfone 4 yang bootloop atau stuck usb yg ciri cirinya hanya keluar logo usb dan sudah gak bisa diapa apain lgi.dan cara instal roms Asus zenfon 4, . oke langsung aja..
1. Hp harus Zenfone 4 yg lain blm tahu.
2. Download bahan bahannya :
FW DnX = http://www.mediafire.com/download/303lg5ggk959fnq/dnx.bin
rom .raw kitkat
https://drive.google.com/file/d/0B39rF4mmwZgTMXo4UkZKdGxoUGc/edit?pli=1

Untuk Firmware bisa kalian cari d google format RAW. Mau kitkat atau jely terserah .

3. Download semua bahan diatas, jadikan satu folder bila perlu (biar gampang nyarinya),
instal Intel USB driver dan Asus usb driver.Jika asus terdetect sebagai cloverview dan bukan sebagai asus zenfone, install driver iSocUSB-Driver-Setup-1.0.4.exe. Sehingga di pc akan terdetect sebagai CloverView Plus Device dan Intel SOC USB Device.Install xfstk-downloader-setup-1.5.1.exe, dan buka xfstk downloader 1.5.1, masuk ke tab CLVP A0/B0/B1 dan pastikan terdeteck SCANNING : CLOVERVIEWPLUS TARGET DETECTED : 1 , jika terdetect sebagai 0, pastikan di device manager ter detect.

4. - buka Buka xFSTK-Downloader di desktop
    - masukan FW DnX, IFWI, OS DnX, OS Image 

- stelah kolom terisi semua nyalakan hh dengan kondisi stuck usb, colokan hh ke kmputer
hh akn terdeteksi oleh xFSTK-Downloader,klik tombol Begin Download. tunggu sampai restat..
Langkah untuk keluar Stuck usb Logo sudah slesai.. hh akan otomatis masuk ke mode droidboot

5. - copy rom di SDCARD (memori eksternal microSD) bisa menggunakan hp lain atau catrider
    - pilih SD Download dan tunggu sampai selesai
       Gambar dibawah :
Diposting oleh di Tidak ada komentar:

Jumat, 18 Agustus 2017

GPS PALSU AGAR TIDAK DIKETAHUI ....server GOJEK

Alat dan Bahan
  • Android dengan status Root OS paling atas Marsmallow di atas marsmallow dan Lollipop sangat sulit karena securitynya sudah sangat Kuat
  • Xposed Installer
  • Modul Dot Mod
  • Aplikasi Fake GPS sejenis ==> BSH Maps, GPS Advance 

  • Cara Pemasangan Fake GPS agar tidak Terdeteksi

  • Install Xposed Installer silahkan sesuiakan dengan Android Os (HP wajib root) sobat bisa download di Google Drive saya termasuk buat ROOT nya
  • Kemudian buka aplikasi exposed nya pada saat pertama kali di buka maka akan menampilkan seperti gambar yang saya tunjukan di bawah ini 


 
  1. Silahkan klik Framework yang waktu itu masih di beri warna merah
  2. lihat ke 2 menu app_process dan XposedBridge.jar statusnya masih – alias tidak aktif
  3. Klik Install / Update
  4. Izikan superuser / Supersu karena aplikasi akan memasang framework pada sistem Android kamu
  5. maka dengan Sendirinya aplikasi akan menginstall dan setelah selesai akan meminta android kamu untuk di restart 

  1. Berikutnya setelah android kamu menyala ulang buka lagi Aplikasi Xposed Installer nya, Pastikan status ke 2 Framework yang tadi masih warna merah berubah menjadi warna hijau yaitu Aktif
  2. Lanjut pindah ke TAB module silahkan search atau scroll dan cari modul dotMod, Klik Version kemudian Download/Install silahkan aktifkan di menu Modul pada Xposed Installer.
 Setting Seperti ini ya !! Hide root — > Menyembunyikan status Root , Hide Mock Location –> Menyembunyikan bahwa kita mengaktifkan Lokasi Palsu

  1. Lanjut sampai di sini anda kini sudah dapat menginstall aplikasi Fake GPS apapun itu nama aplikasinya terserah anda, namun di sini saya akan coba mencontohkan dengan Aplikasi BSM Maps
  2. Anggap saja saya sudah Install aplikasi BSH maps nya dan akan setting lokasi saya di mana mau Titik / simpan
  3. Jangan lupa AKtifkan menu Allow Mock location di menu developer options allow mock location 
  4. Silahkan pasang dimana anda ingin terdeteksi berada dengan aplikasi Fake GPS kesayangan anda saya di sini mencontohkan memakai BSH Maps.
  5. Sekarang saatnya test Posisi anda saat ini berada dimana dengan membuka google maps dan setelah anda setting dimana berada saya akan beri contoh pasang di Monas Ya hehe …. tepat di Istana merdeka
Diposting oleh di Tidak ada komentar:

Kamis, 17 Agustus 2017

IMEI invalid just for MTK device


Diposting oleh di Tidak ada komentar:

Selasa, 15 Agustus 2017

KAMI BUKAN DUKUN HANDPHONE BOSS.....


Diposting oleh di Tidak ada komentar:

Bypass & Remove Mi Cloud Account on Redmi 3s/3 Prime



                                                                        here
Diposting oleh di Tidak ada komentar:

Senin, 14 Agustus 2017

FRP SAMSUNG J7 PRIME


 
 LOOK HERE .....
Diposting oleh di Tidak ada komentar:

Minggu, 13 Agustus 2017

phone lock and FRP F1 oppo

Diposting oleh di Tidak ada komentar:

Sabtu, 12 Agustus 2017

PHONE LOCK DAN FRP OPPO F1 qualqome done by kedai ponsel bunda


Diposting oleh di Tidak ada komentar:

Jumat, 11 Agustus 2017

NVRAM for LENOVO



HERE .....
Diposting oleh di Tidak ada komentar:

Kamis, 10 Agustus 2017

LG FIRMWARE donlot HERE......

                                                                               HERE...

                                                                      alternatif link ......


                                                                                HERE...
Diposting oleh di Tidak ada komentar:

ASUS UPDATE FIRMWARE BI GLOBAL SITE here....

 
HERE...

Diposting oleh di Tidak ada komentar:

SAMSUNG FIRMWARE DONLOT HERE BOSSS.....



 
HERE 

Diposting oleh di Tidak ada komentar:

LENOVO ALL FIRMWARE DONLOT HERE....



                                                                           HERE
Diposting oleh di Tidak ada komentar:

UNTUK MECARI PERSAMAAN KOMPONEN SAMSUNG DLL


silahkan kawan2 masukin kodenya kedalam originalspareparts dan kita bisa lihat persamaan ic atau komponen laen di tipe handphone berbeda nih link nye bosss :


http://originalspareparts.com.ua/


tutorialnye liat aja deh di sini :

misalnya kita memilih salah satu resistor yg biasa kita buat titk ISP untuk CMD yaitu R319


selanjutnya kita mencari kode dari R319 tadi pada part list seperti ini :


kodenya adalah  2007-008516

selanjutnya dari kode tersebut kita copy dan kita masuk ke website :

http://originalspareparts.com.ua/


masukan kode 2007-008516 untuk mencari persamaan part numbernya seperti pada gambar di bawah :

 kita bisa lihat banyak sekali persamaan resistor yg kita inginkan tadi ....

Untuk jenis ic EmmC pun perlakuannya sama seperti diatas ....
jadi kita bisa mengganti tipe ic Emmc dengan persamaannya ....

SALAM KEDAI PONSEL BUNDA









Diposting oleh di Tidak ada komentar:

CARA SOFTWARE , FIRMWARE , SCHEMATIK DLL ADA DISINI FREE BOSS......

http://www.mtkdeveloper.com/
Diposting oleh di Tidak ada komentar:

Rabu, 09 Agustus 2017

ARTI ERROR PADA SP FLASH TOOL MTK


List of SP Flash Tool errors & their solutions




Phone is totally dead


Message: Phone no longer responds to power button

Solution:

Phone still not working after flashing


Message: Phone still stuck at Bootlogo or Bootloop

Solution: 
  • Ensure there's a formatted SD card in the phone before flashing
  • Give up to 5 minutes because first boot takes time
  • Boot the phone into recovery mode then wipe data / factory reset
  • Remove the battery for 30 seconds then slot back in
  • Try a firmware upgrade . use MTK droid tools version 2.3.0 to backup usrdata & cache or copy then from the clockworkmod backup
  • Try a firmware / ROM from another source

Phone shows white screen, strange colors or divided screen after flashing


Message: You can see the phone responding to buttons and making sound but all is blurred by white screen

Solution:
  • The ROM / Firmware you flashed is incompatible, get from another source (especially boot.img , logo.bin and uboot.bin / lk.bin )

Phone automatically disconnecting during flashing


Message: The phone makes the disconnecting sound just as flashing begins, interrupting the process

Solution: 
  • Try a different USB cord, USB port & PC
  • Try holding down the Volume decrease (you could try volume increase or both) while connecting the phone to PC for flashing
  • Launch Device manager (Right-click My Computer > Select Manage)
  • Connect the phone to the PC via a USB cord, Device manager should refresh
  • Take note of what the phone is detected as (often as Unknown or Mediatek under Other devices)
  • Right-click whatever the phone is detect as and select Update Driver Software...
  • Select Browse my computer for driver software
  • Select Let me pick from a list of device drivers on my computer
  • Click Next
  • Click Have Disk
  • Proceed with the Mediatek (VCOM) driver installation steps described at https://forum.hovatek.com/thread-440.html and click Yes if you get an Update Driver warning

Sp Flash tool remains at 0%


Message: Phone only shows charging sign

Meaning: Necessary drivers have not been successfully installed on the PC

Solution: 
  • Follow this guide @ https://forum.hovatek.com/thread-440.html  to manually install vcom drivers
  • If you have installed VCOM drivers but the phone is still only charging then Launch Device manager (Right-click My Computer > Select Manage)
  • Connect the phone to the PC via a USB cord, Device manager should refresh
  • Take note of what the phone is detected as (often as Unknown or Mediatek under Other devices)
  • Right-click whatever the phone is detect as and select Update Driver Software...
  • Select Browse my computer for driver software
  • Select Let me pick from a list of device drivers on my computer
  • Click Next
  • Click Have Disk
  • Proceed with the Mediatek (VCOM) driver installation steps described at https://forum.hovatek.com/thread-440.html and click Yes if you get an Update Driver warning

Error 5054


Message:  BROM ERROR S_DL_GET_DRAM_SETTINGS_FAIL (5054)

Meaning: The files you're trying to flash do not belong to or are not compatible with the phone you're trying to flash them to

Solution: 
  • Ensure you're using the correct files. If you're sure they are, then try formatting before flashing again

Initialize scatter failed


Message: Error: Initialize scatter file failed. Please check the scatter file name you load is legal

Meaning: SP Flash tool doesn't accept the name format of your scatter file

Solution: 
  • Ensure the scatter file wasn't renamed. If you're certain it wasn't, try a higher version of SP Flash tool

Error 8038


Message: Error 8038! Android download  pmt is ready and layout has been changed

Meaning: SP Flash tool is having trouble writing to certain partitions due to some incompatibility

Solution: 
  • Format the phone in SP flash tool (Do not format Bootloader) then try flashing the files again using Download
  • If Download doesnt work then do a firmware upgrade
  • If the MTK backup contains more than one scatter file, retry flashing with the other scatter file.
  • If that isn't feasible, try formatting first or use firmware upgrade
  • If that doesn't work, open the scatter file using Notepad++ and change __NODL_FAT to FAT by removing "__NODL_" .

Error 4032


Message: BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032) [EMI] Enable DRAM fail

Meaning: The firmware you're trying to flash is either not compatible with your device or you have selected the wrong flashing settings

Solution: 
  • Ensure that the file(s) you're trying to flash are actually for your exact phone model
  • Ensure you tick the boxes for only the files present in the ROM you're about to flash
  • Probably have the wrong driver installed. Uninstall vcom,  preloader and MTK drivers using usb deview then manually re-install using  https://forum.hovatek.com/thread-440.html
  • Delete the sp flash tool folder then re-extract
  • Ensure the phone is switched off (with battery still inside) before connecting to PC for flashing.
  • If that doesn't work, keep  holding  down the volume decrease button just before connecting the phone to PC for flashing (you could try volume increase , power + volume decrease or power + volume increase).
  • Consider using the latest version of Sp Flash tool
  • Format the phone before trying to flash the file(s) again

Error 5056


Message: BROM ERROR : S_DL_PMT_ERR_NO_SPACE (5069)

Meaning:  The size of a file is larger than the available / possible partition size

Solution: 
  • Ensure that the file(s) you're trying to flash are actually for your exact phone model
  • Try another stock ROM
  • Change the phone's emmc chip

Error 4001


Message: S_FT_DA_NO_RESPONSE or Da didn't send response data to FlashTool!

Meaning: SP flash tool is having difficulty communicating with the device

Solution:  
  • Change the USB-port
  • Run SP flash tool as Admin
  • Ensure to install the correct drivers (see https://forum.hovatek.com/thread-440.html )
  • Try another PC and USB cord
  • Ensure the phone is switched off with a charged battery inside when connecting to the PC for flashing

Sp flash tool was successful but phone's calibration doesn't work


Message: Soft keys and touch screen don't work / respond

Solution:
  • Edit the scatter file using Notepad++ and remove NODL__  (or set is_download: false to is_download: true ) in front of the items you have in the backup folder but aren't listed when you load the scatter file in SP flash tool. This way, these items will become listed when  next you load the scatter file (after saving of course) and therefore flashable

Error 4008


Message: BROM ERROR : S_FT_DOWNLOAD_FAIL (4008)

Meaning: SP Flash tool encountered an error while attempting to flash files

Solution: 
  • Ensure the battery is in the phone and the phone is switched off before connecting for flashing
  • Try using a higher version of SP flash tool
  • Change the USB cord and port or PC
  • Use the format option then download in SP flash tool

Error 3149


Message: BROM ERROR : S_DA_SDMMC_WRITE_FAILED (3149)

Meaning: SP Flash tool was unable to flash files to the phone

Solution:
  • Ensure to run the latest version of SP flash tool as Administrator
  • Format first then Download
  • Don't tick a box with an unspecified / empty file path
  • Ensure the phone is switched off (with a well charged battery in it ) before connecting to PC for flashing
  • Try a different PC
  • Try a different ROM
  • Try a different USB cord
  • Try formatting the phone first before flashing files to it

Error 3168 


Message: BROM ERROR: S_CHIP_TYRE_NOT_MATCH(3168)

Meaning: Sp flash tool believes there's a mismatch between the information provided in the scatter file and the phone's info.

Solution:
  • Ensure you're using the ROM for the exact phone model
  • Try a higher version of SP flash tool
  • Ensure to install the correct drivers for the phone on the PC

Error 2004 


Message: BROM ERROR : S_FT_DOWNLOAD_FAIL (2004)

Meaning: There was an interruption in the communication between SP flash tool and the device

Solution:
  • Take out and reinsert the battery
  • Try using a different USB cord, port and PC
  • Right-click flash_tool.exe > Select Properties > Select Compatibility > Set to Windows XP Service Pack 3 > Click Apply > Click OK > Run SP flash tool as Administrator
  • Try a different USB cord
  • Try a different port on the PC or another PC
  • Ensure the battery is well changed and inside the switched off phone before connecting to PC for flashing

USB device not recognized


Message: USB device not recognized prompt at system tray after connecting  the phone to PC

Meaning: The PC is having problems communicating with the phone (often due to interruption, hardware or driver problems)

Solution:

Error 1013 


Message: BROM ERROR:S_COM_PORT_OPEN Fail(1013)

Meaning: SP flash tool encountered an error while attempting to communicate with the phone via the target port

Solution:
  • Try using a different port on the PC
  • Try a different version of SP flash tool
  • Install VCOM drivers using  https://forum.hovatek.com/thread-440.html
  • Ensure the phone is switched off with battery inside before connecting to the PC for flashing
  • Try using a different PC
  • Try changing the USB cord
  • Ensure the phone's USB port isn't damaged

Error 2020 


Message: BROM ERROR : S_BROM_CHKSUM16_MEM_RESULT_DIFF (2020)

Meaning: SP flash tool encountered a problem moving the files to be flashed into the phone's internal SRAM

Solution:
  • Use the latest version of SP flash tool
  • In SP flash tool, navigate to Options > Option > Connection > Battery. Set it to "with battery".
  • Use the Format all + Download option
  • Hold both volume buttons before connecting to the PC for flashing and release once flashing begins

Error 5007 


Message: BROM ERROR : S_FTHND_FILE_IS_NOT_LOADED_YET (5007)

Meaning: You're trying to flash an item with an unspecified path (no file selected for the ticked item/box)

Solution:
  • Ensure the scatter file is in the same directory as the other file(s) to be flashed
  • Untick any item whose file you do not have or whose path is not specified; yet, is ticked / selected for flashing

Error 4010


Message: BROM ERROR : S_FT_FORMAT_FAIL

Meaning: The blocks map in the scatter file doesn't match the phone's partition sizes

Solution:
  •  Try using the latest version of Sp flash tool
  • Try using another firmware for the exact phone model

Error 3182


Message: BROM ERROR: S_STORAGE_NOT_MATCH (3182)

Meaning: The ROM your're trying to flash is not compatible with the target device

Solution:
  • Download the ROM for the exact phone model you're trying to flash
  • Ensure to install VCOM drivers on the PC
  • Don't tick any box (after loading the scatter file) without a file path / whose corresponding file has not been automatically or manually loaded.

Error 6012


Message: BROM ERROR: S_SECURITY_SF_CODE_COMMAND_FORBIDDEN (6012), MSP ERROR CODE: 0X00

Meaning: The Download-Agent being used is incompatible with the phone

Solution:
  • Set Download-Agent to MTK_AllInOne_DA.bin

Error 1042


Message: BROM ERROR: S_TIMEOUT (1042)

Meaning: The flashing process took too long so SP flash tool encountered a timeout

Solution:

Error 2


Message: BROM ERROR: ?? (2)

Meaning: SP Flash tool was unable to communicate with the phone

Solution: 
  • Try using a different PC (preferably Windows 7 or lower)
  • Install the correct VCOM drivers for your PC's OS and architecture (32 or 64 bit)
  • Try another USB cord

Error 2005


Message: BROM ERROR: S_BROM_CMD_STARTCMD_FAIL (2005)

Meaning: The device attempted to power on before SP flash tool could flash files to it

Solution:
  • Ensure the battery is well charged
  • Take out and reinsert the battery
  • Try using a different USB cord, port and PC
  • Right-click flash_tool.exe > Select Properties > Select Compatibility > Set to Windows XP Service Pack 3 > Click Apply > Click OK > Run SP flash tool as Administrator
  • Try a different USB cord
  • Try a different port on the PC or another PC
  • Ensure the battery is well changed and inside the switched off phone before connecting to PC for flashing
  • Do not hold any button when connecting to PC

Error 4058


Message: BROM ERROR: S_FT_GET_MEMORY_FAIL (4058)

Meaning: SP flash tool was unable to locate the partition you're trying to flash to

Solution:
  • Untick any item (box) with a blank or empty Location

Error 3178


Message: BROM_ERROR_S_STORAGE_NOT_MATCH (3178)

Meaning: The firmware you are trying to flash isnt compatible with your phone

Solution:
  • Try flashing another firmware for your exact phone model / variant

Error 8406


Message: SP FLASH TOOL ERROR (8406)

Meaning: There is some compatibility problem interrupting the flashing process

Solution:
  • Try flashing another firmware for your exact model
  • Update VCOM drivers for the device under Device manager

Error 1012


Message: BROM ERROR: S_NOT_ENOUGH_MEMORY (1012)

Meaning: The version of SP flash tool you're using doesn't support the size(s) of the file(s) in the firmware / stock ROM.

Solution:
  • Use the latest version of SP flash tool

Error 3140


Message: BROM ERROR : S_DA_UPDATE_BOOLOADER_EXIST_MAGIC_NOT_MATCHED

Meaning: SP flash tool encountered an error flashing a selected file to a non-specified partition

Solution:
  • Try using the latest version of SP flash tool
  • Use the format option then download in SP flash tool

Error 8417


Message:  BROM ERROR: Initialize scatter file failed. Please check the scatter file name you load is legal

Meaning: The format of the scatter file is invalid

Solution:
  • Open the scatter file in Notepad++, the first line must begining with:

    ############################################################################################################## General Setting #

    If there is anything else above this then delete it and save the scatter file

Error 6047


Message: BROM ERROR: S_SECURITY_SECURE_USB_DL_IMAGE_HASH_FAIL

Meaning: Hash (integrity) check of the images being flashed failed.

Solution:
  • Use SP Flash Tool V5.1516.00 @ https://adf.ly/1ZI3Ym
  • Ensure to select the right Download-Agent
  • Navigate to Options > Option > Download and untick DA DLL All.....

Error 6010


Message: BROM ERROR: SP FLASHTOOL ERROR 6010 CODE DOWNLOAD FORBIDDEN

Meaning: The phone has a protected bootloader

Solution:
  • Untick Preloader and flash the rest

Error: 0xFDA


Message: BROM ERROR: S_FT_GET_MEMORY_FAIL (0xFDA)

Meaning: SP Flash tool encountered an error reading the phone's storage

Solution:
  • Try using a different USB Port, Cord and PC

Error 0x13BE


Message: S_DL_GET_DRAM_SETTING_FAIL (0x13BE)

Meaning: The firmware you're trying to flash is either not compatible with your device or you have selected the wrong flashing settings

Solution:
  • Ensure that the file(s) you're trying to flash are actually for your exact phone model
  • Ensure you tick the boxes for only the files present in the ROM you're about to flash

Error:?? (0x3)


Message: BROM ERROR:?? (0x3)

Meaning: SP Flash tool encountered an error maintaining a connection to the device during flashing

Solution

PRO_INFO: Failed to get PMT info


Message: PRO_INFO: Failed to get PMT info

Meaning: SP flash tool is having problems reading the phone

Solution
  • Try using a different PC and USB cord
  • Ensure the phone is switched off (with a charged battery inside) when you connect

Error 0x7D4


Message: BROM ERROR: S_BROM_DOWNLOAD_DA_FAIL

Meaning: SP Flash tool encountered an error writing to the phone

Solution
  • Try changing the Download Agent setting
  • Try using a different USB cord, PC port and PC
  • Use the latest version of SP flash tool
  • Ensure the battery is well charged and the phone's USB port isn't faulty

Error 6124


Message: BROM ERROR: S_SECURITY_INVALID_PROJECT (6124), MSO ERROR CODE: 0X00

Meaning: Wrong flash settings or firmware

Solution:
  •  Ensure you set the correct Download-Agent in SP flash tool and are using a firmware for your exact model
  • Go to  Options > Option > Connection > USB Speed > Full Speed
  • Go to  Options > Option > Download > Untick DA DL All with Checksum

Error 0x8


Message: BROM ERROR: ?? (0x8)

Meaning:  The size of a file is larger than the available / possible partition size

Solution: 
  • Ensure that the file(s) you're trying to flash are actually for your exact phone model
  • Try another stock ROM
  • Change the phone's emmc chip
  • Try using a different PC

Error OXFC0


Message: BROM ERROR S_FT_ENABLE_DRAM_FAIL (OXFC0)

Meaning: The firmware you're trying to flash is either not compatible with your device or you have selected the wrong flashing settings

Solution: 
  • Ensure that the file(s) you're trying to flash are actually for your exact phone model
  • Ensure you tick the boxes for only the files present in the ROM you're about to flash
  • Probably have the wrong driver installed. Uninstall vcom,  preloader and MTK drivers using usb deview then manually re-install using  https://forum.hovatek.com/thread-440.html
  • Delete the sp flash tool folder then re-extract
  • Ensure the phone is switched off (with battery still inside) before connecting to PC for flashing.
  • If that doesn't work, keep  holding  down the volume decrease button just before connecting the phone to PC for flashing (you could try volume increase , power + volume decrease or power + volume increase).
  • Consider using the latest version of Sp Flash tool
  • Format the phone before trying to flash the file(s) again

Error 0X411


Message: BROM ERROR: S_CHKSUM_ERROR (0X411)

Meaning: There was a checksum error when flashing the firmware

Solution
  • Delete any file with checksum in its name from the firmware folder
  • Go to Options > Option > Download > Untick Da DL all with checksum

Error 0xFA1


Message: BROM ERROR : S_FT_DA_NO_RESPONSE (0xFA1)

Meaning: SP Flash tool encountered an error communicating with the device

Solution
  • Try using a different port, PC and USB cord
  • Ensure the phone is switched off with a charged battery inside
  • Do not hold any button when connecting for flashing
  • Ensure to install VCOM drivers @ https://forum.hovatek.com/thread-440.html

Error 4017


Message: BROM ERROR: S_FT_NAND_READLEN_NOT_ALIGNMENT (4017)

Meaning: You're trying to flash a file that has not been processed for flashing in SP flash tool

Solution:

TOOL DL image Fail !


Message: TOOL DL image Fail !

Meaning: The firmware was flashed with Da DL all with Checksum disabled

Solution:
  • In SP flash tool, navigate to Options > Option > Download > Tick Da Dl all with checksum > Reflash the firmware

Please select one ROM at least before execution


Message: Please select one ROM at least before execution

Meaning: SP flash tool fails to recognize that there is an item ticked

Solution:
  • Select the scatter file again and untick all items you do not wish to flash one after the other. Don't use the checkbox beside "Name" in SP flash tool

Error 0xFC0


Message: BROM ERROR : S_FT_ENABLE_DRAM_FAIL (0xFC0)

Meaning: The firmware you're trying to flash is either not compatible with your device or you have selected the wrong flashing settings

Solution: 
  • Ensure that the file(s) you're trying to flash are actually for your exact phone model
  • Ensure you tick the boxes for only the files present in the ROM you're about to flash
  • Probably have the wrong driver installed. Uninstall vcom,  preloader and MTK drivers using usb deview then manually re-install using  https://forum.hovatek.com/thread-440.html
  • Delete the sp flash tool folder then re-extract
  • Ensure the phone is switched off (with battery still inside) before connecting to PC for flashing.
  • If that doesn't work, keep  holding  down the volume decrease button just before connecting the phone to PC for flashing (you could try volume increase , power + volume decrease or power + volume increase).
  • Consider using the latest version of Sp Flash tool
  • Format the phone before trying to flash the file(s) again

Error: 0xC0050003


Message: BROM ERROR: STATUS_DOWNLOAD_EXCEPTION (0xC0050003)

Meaning: There was an interruption during writing to one or more partitions

Solution:
  • Repeat flashing with the latest version of SP Flash Tool
  • Try using a different Port, USB cord and PC

Error: 0xc002002A


Message: BROM ERROR: STATUS_SEC_IMG_TYPE_MISMATCH (0xc002002A)

Meaning: The firmware you're trying to flash is either not compatible with your device or you have selected the wrong flashing settings

Solution: 
  • Ensure that the file(s) you're trying to flash are actually for your exact phone model
  • Ensure you tick the boxes for only the files present in the ROM you're about to flash
  • Probably have the wrong driver installed. Uninstall vcom,  preloader and MTK drivers using usb deview then manually re-install using  https://forum.hovatek.com/thread-440.html
  • Delete the sp flash tool folder then re-extract
  • Ensure the phone is switched off (with battery still inside) before connecting to PC for flashing.
  • If that doesn't work, keep  holding  down the volume decrease button just before connecting the phone to PC for flashing (you could try volume increase , power + volume decrease or power + volume increase).
  • Consider using the latest version of Sp Flash tool
  • Format the phone before trying to flash the file(s) again

Error 0XFA8


Message: BROM ERROR: S_FT_DOWNLOAD_FAIL (0XFA8)

Meaning: SP Flash tool encountered an error while attempting to flash files

Solution: 
  • Ensure the battery is in the phone and the phone is switched off before connecting for flashing
  • Try using the latest version of SP flash tool
  • Change the USB cord and port or PC
  • Use the format option then download in SP flash tool
  • Try changing the Download Agent setting in SP Flash tool

Error 0x7D5


Message: BROM ERROR: S_BROM_CMD_STARTCMD_FAIL (0x7D5)

Meaning: The device attempted to power on before SP flash tool could flash files to it

Solution:
  • Ensure the battery is well charged
  • Take out and reinsert the battery
  • Try using a different USB cord, port and PC
  • Right-click flash_tool.exe > Select Properties > Select Compatibility > Set to Windows XP Service Pack 3 > Click Apply > Click OK > Run SP flash tool as Administrator
  • Try a different USB cord
  • Try a different port on the PC or another PC
  • Ensure the battery is well changed and inside the switched off phone before connecting to PC for flashing
  • Do not hold any button when connecting to PC

Boundary Check Failed


Message: Boundary Check Failed: rom_end_addr >= next rom begin_addr.

Meaning: The firmware has a partition that wasn't included while backing up the firmware. SP flash tool encounters an error in the end address of the preloader partition and the begin address of PGPT partition (i.e the partition which wasn't included in the backup)

Solution:
  • Close the error message,  then manually select the location of all files in the scatter file from the bottom to the top. Meaning that preloader would be the last thing you'll select
  • If that doesn't work, open and modify the scatter file using Notepad++ then change "boundary_check: True" to "boundary_check: False"
  • If after modifying the scatter file and you still encounter the same or a different error, then flash the firmware using miracle box @ https://forum.hovatek.com/thread-14106.html

Error 3179


Message: BROM ERROR : S_CHIP_TYPE_NOT_MATCH (3179)

Meaning: The firmware you're trying to flash is either not compatible with your device or you have selected the wrong flashing settings

Solution: 
  • Ensure that the file(s) you're trying to flash are actually for your exact phone model
  • Ensure you tick the boxes for only the files present in the ROM you're about to flash
  • Probably have the wrong driver installed. Uninstall vcom,  preloader and MTK drivers using usb deview then manually re-install using  https://forum.hovatek.com/thread-440.html
  • Delete the sp flash tool folder then re-extract
  • Ensure the phone is switched off (with battery still inside) before connecting to PC for flashing.
  • If that doesn't work, keep  holding  down the volume decrease button just before connecting the phone to PC for flashing (you could try volume increase , power + volume decrease or power + volume increase).
  • Consider using the latest version of Sp Flash tool
  • Format the phone before trying to flash the file(s) again

Error 5073


Message: BROM ERROR : S_DL_READ_PT_FAIL (5073)

Meaning: SP flash tool encountered an error while trying to format the device

Solution: 
  • Use "download only" under the download tab to flash the firmware then you can format if need be.

SP Flash Tool force-closes when scatter file is loaded


Message: SP Flash tool automatically closes after selecting a scatter file

Meaning: SP Flash Tool doesn't support the scatter file due to its blocks or configuration

Solution:
  • Open the scatter file using Notepad++ >  Locate the last partition on the list (flashinfo) > change is_download from true to false > Save the scatter file and reload

Storage type mismatch!


Message: scatter storage type is HW_STORAGE_EMMC
target storage type is HW_STORAGE_NAND

Meaning: There's a mismatch between the phone's storage type and that which the scatter file expects

Solution:

Error 8045


Message: No Valid Partition Management Table (PMT) for storage

Meaning: SP Flash tool encountered a problem identifying the device's partitions ahead of file writes

Solution:
  • Try Flashing the firmware using Download only

Error 1041


Message: BROM ERROR: S_CHKSUM_ERROR (1041)

Meaning: There was a checksum error when flashing the firmware

Solution
  • Delete any file with checksum in its name from the firmware folder
  • Go to Options > Option > Download > Untick Da DL all with checksum

0x00


Message: BROM ERROR: S_SECURITY_AC_REGION_NOT_FOUND_IN_SECROIMG (6128), MSP ERROR CODE: 0X00

Meaning:  The ROM contains a Checksum file but DL All With CheckSum was unticked

Solution:
  • Ensure to tick DL All With CheckSum under Options > Option > Download

BROM ERROR : S_SECURITY_SECRO_HASH_INCORRECT (6126) , MSP ERROE CODE : 0x00


Message: BROM ERROR : S_SECURITY_SECRO_HASH_INCORRECT (6126) , MSP ERROE CODE : 0x00

Meaning:  The ROM contains a Checksum file but DL All With CheckSum was unticked

Solution:
  • Ensure to tick DL All With CheckSum under Options > Option > Download

Error 0xC0050005


Message: ERROR STATUS_EXT_RAM_EXCEPTION (0xC0050005)

Meaning: The firmware you're trying to flash is either not compatible with your device or you have selected the wrong flashing settings

Solution:
     
  • Ensure that the file(s) you're trying to flash are actually for your exact phone model
  • Ensure you tick the boxes for only the files present in the ROM you're about to flash

Error (3)


Message: BROM ERROR: ?? (3)

Meaning: There's a problem with the format of the scatter file or file(s) being flashed. An example is trying to flash .bin files using SP Flash Tool

Solution:
  • Check the scatter file and files you're about flashing to be sure they're not meant to be flashed using a different tool

Error 6104


Message:  BROM ERROR: S_SECURITY_SECURE_USB_DL_DA_RETURN_INVALID_TYPE (6104), MSP ERROR CODE : 0X00

Meaning: Wrong flash settings or firmware

Solution:
  •  Ensure you set the correct Download-Agent in SP flash tool and are using a firmware for your exact model
  • Go to  Options > Option > Connection > USB Speed > Full Speed
  • Go to  Options > Option > Download > Untick DA DL All with Checksum

Error 3183 


Message: BROM ERROR: S_CHIP_TYRE_NOT_MATCH(3183)

Meaning: Sp flash tool believes there's a mismatch between the information provided in the scatter file and the phone's info.

Solution:
  • Ensure you're using the ROM for the exact phone model
  • Try a higher version of SP flash tool
  • Ensure to install the correct drivers for the phone on the Pc



Diposting oleh di Tidak ada komentar:

SPD UPGRADE TOOL ALL versi boss.....

https://androidmtk.com/download-spd-upgrade-tool-all-versions
Diposting oleh di Tidak ada komentar:

OPPO ALL FIRMWARE BI ....josss

http://www.oppo.com/id/downloads/
Diposting oleh di Tidak ada komentar:

ALL TOOL SOFTWARE FREE.....

https://androidmtk.com/category/tools
Diposting oleh di Tidak ada komentar:

ALL FIRMWARE SAMSUNG BOSS MONGGO free ....

https://androidmtk.com/download-samsung-stock-rom
Diposting oleh di Tidak ada komentar:

Sabtu, 05 Agustus 2017

alat service kami


Diposting oleh di Tidak ada komentar:

software repair




Diposting oleh di Tidak ada komentar:

harware repair


Diposting oleh di Tidak ada komentar:

Jumat, 04 Agustus 2017

Gsm Aladdin V2 1.40 Free Withouth Password and HWID

Free Download Gsm Aladdin V2 1.40 Withouth Password and HWID

1. MTK Improve MT67xx Write and Format.
2. SPD CS9830 EMMC Add New Mobile Support.
3. MTK Flasher Improve and Add Auto Read Firmware Info.
5. Samsung Add Repair DRK (ADB).
6. Android Add Sideload ZIP Update System (ADB).
7. Android Improve Install APK and Add Reboot Download (ADB).
8. Android Add Repair Imei (Fastboot).
9. Android Add Repair Meid (Fastboot).
10. Android Add File-Lock (Fastboot).
11. Android Add Get-Token (Fastboot).
12. Android Add Goto-RRU (Fastboot).
13. Android Add Flash Zip for Update (Fastboot).
14. Software fix some bugs.

Download Gsm Aladdin V2 1.40
Diposting oleh di Tidak ada komentar:

Senin, 31 Juli 2017

Cara buat kabel dfu edl xiomi, spreadtru mtk auto flash dan jig download...

Diposting oleh di Tidak ada komentar:
Langganan: Postingan (Atom)